+86-511-86312330

News

Home > News > Content

Drill Bits for General Use

Jiangsu Yaofeng Tools Co.,Ltd | Updated: Aug 30, 2018

Are you reworking a rest room, change or redesigning your room tile inlay? the thought of drilling will be discouraging. you only would like the correct and long lasting drilling bit and many straightforward tips about selecting the correct one. Care tips also?


Drill bits are commonly used for cutting tools to bore a cylindrical hole and it's the most important part of or your toolbox. There area unit many forms of drill bits with a distinct purpose. the foremost used drill bits area unit wood drill bits; hole saw drill bits, installer, metal drill bits, diamond drilling bit, and masonry drilling bit.


Diamond drill bits area unit straightforward to use and this can be what you would like for your toilet DSC_1363.jpgreworking or change and redesigning your room inlay, however, there area unit several techniques to use that take issue from different bits. Diamond drill bits area unit used on glass, ceramics, ceramic tile, glass, limestone, marble, stone, fiberglass, porcelain, ceramic ware tile and slate.There are 2 forms of diamond drill bits regarding the applying, the guaranteed and work.


Taking care of your diamond bit is that the most significant half. Here area unit some tips about a way to watch out of your drilling bit. Lubrication is that the easiest method of taking care of the drill bits. Water or agent reduces the warmth build-up, it prolongs the lifetime of your drilling bit and helps avoid heat fracture of the merchandise. Oil based mostly lubricator don't work well on diamond drill bits.


When drilling with diamond drill bits, primary concern is obtaining enough water on the sting of the drilling bit, no mama what technique you reaching to use.


When drilling covering material, the drill will be used either wet or dry, however confirm that the water contains a very little quantity of water merely enough to form the drill wet. In drilling glass or ceramics, soft ceramic tile and ceramic ware, the mud ought to be dissipate into the water. once drilling laborious materials, it ought to have touch of water perpetually running over the drilling bit.


One trick to induce enough water is by putt plastic jug or bottle with alittle hole close to the lowest of the drill, next to the excavation during which water can leak to supply continuous lubrication once drilling.


If the drilling bit becomes yellow, brown or black (the burn marks) around its tip, it's an indication of heat caused by too much pressure on the drill. If the opening is totally trained onto the fabrics it's conjointly necessary to slow down on the pressure once the drilling bit is close to the material. continually keep your drill super form by caring the facility wire and continually checked its electrical issues. Please note that early detection will save larger issues later.


When drilling use protecting gear on your face particularly on your eyes. Use hearing protection to avoid hearing impairment and gloves for hand protection.


The life of a diamond drilling bit depends on the hardness and abrasiveness of the fabric being trained. It conjointly depends on the thickness of the fabric and therefore the speed of the drilling bit and use of adequate lubrication. considerably, the hardness and abrasiveness will vary. Materials could look similar however they need variable degrees of hardness and abrasiveness. Associate in Nursing electroplated diamond drilling bit below ¾ could last for two hundred to three hundred holes or additional.


I hope the following tips have helped you in your questions about drill bits. you may not recognize once this may be helpful for you. ought to the requirement arise, you'll continually go browsing to envision offered info prepared for viewing.


Home | About Us | Products | News | Equipment | Contact Us | Feedback | Mobile | XML

TEL: +86-511-86312330  E-mail: rita@yftools.com