+86-511-86312330

News

Home > News > Content

How To Improve Service Life Of Diamond Saw Blade

Jiangsu Yaofeng Tools Co.,Ltd | Updated: Aug 07, 2018

1) Line Speed of Saw Blades: the road speed of diamond buzz saw blades is proscribed by instrumentality conditions and therefore the quality of saw blades. additionally, to urge the most effective service life and cutting potency, you must additionally contemplate the various natures of the various stones to be sawed once selecting the road speed. In granite sawing, the road speed will ordinarily be set inside the vary of 25m-35m/s. For the granite of high-content of quartz and so tough for sawing, the lower limit of the road speed vary is suitable. within the production of granite tiles, because the smaller diameter of diamond buzz saw blades square measure used, the road speed will reach 35m/s.


2) Cutting Depth: Cutting depth is a vital parameter relating to the wear and tear of diamond, effectively cutting, the pressure state of affairs of saw blades, and therefore the nature of the stone to be sawed. In general, once a high line speed is chosen, you must opt for atiny low cutting depth. By current technologies, cutting depth will ordinarily be chosen between 1mm-10mm. once large-diameter saw blades square measure adopted to saw the raw materials of granite, cutting depth may be controlled inside 1mm-2mm, and at identical time the feed speed ought to be reduced.

201807310933123286416.png

When the road speed is low, typically a giant cutting depth ought to be chosen to enhance the cutting potency, however the cutting depth should be allowable by the performance of the machine and therefore the strength of saw blades. Moreover, once there square measure necessities for the granite surface, atiny low cutting depth ought to be used.




3) Feed Speed: Feed speed here means that the speed of feed of the stone to be sawed. It impacts cutting potency, the pressure on blade, still because the cooling of the cutting space. Its price ought to be chosen in step with the character of the stone to be sawed. In general, once sawing soft stone resembling marble, you'll be able to increase the cutting depth and reduce the feed speed. this may improve the cutting potency. once cutting a form of granite that is of spectrum line and is comparatively same, the user will befittingly increase the feed speed. If the feed speed is just too low, the innovative of diamonds are simply removed. However, once cutting another reasonably granite that is of coarse-grained structure and uneven hardness, you must decrease the feed speed, otherwise the saw blade can vibrate, and this may result in the fragmentation of diamonds, and therefore the cutting potency can then be diminished. The feed speed for cutting granite is generally chosen within the vary of 9m-12m/min.

Home | About Us | Products | News | Equipment | Contact Us | Feedback | Mobile | XML

TEL: +86-511-86312330  E-mail: rita@yftools.com