+86-511-86312330

News

Home > News > Content

What Is Diamond Saw Blade

Jiangsu Yaofeng Tools Co.,Ltd | Updated: Sep 06, 2018

A Diamond Saw Blade may be a saw blade that's factory-made with a metal or steel core, also as diamond crystals adhered to the cutting portion (segments) of the blade. These blades area unit capable of cutting through very arduous or abrasive materials, akin to concrete, stone, brick, asphalt, masonry, porcelain, tile, granite, marble, and more.  The blade is capable of cutting through arduous materials because of the very fact that the cutting segments of the blade area unit composed of crystals. In fact, the blades do not really cut across these materials, however rather the diamond lined cutting teeth or segments grind through the fabric to make the cut.  230mm 9''180mm 7''125mm 5''110mm 4''115mm 4-1 2''.jpg


How the crystals area unit adhered to the core depends on however the blade are going to be used, and there area unit variety of various ways in which this may be done. Some blades area unit composed of crystals that area unit combined with powder metal and area unit then heated and wrought into segments welded to the core. alternative blades might have the crystals electroplated on to the core, or might use a technique referred to as brazing, to make one layer blade.  


The design may have an effect on the appliance the blade is employed for or the fabric it's meant to chop through. additionally to the assorted ways in which the diamond crystals may be combined and adhered to the blade to make totally different uses for the blade, the steel or metal core may have an effect on the employment of the blade or the materials it may be used with. Some cores have one swish rim, that provides a electric sander cut, whereas alternative cores have areas or gullets between every section of crystal cutting teeth that the blade will cool throughout cutting. Blades additionally are available totally different shapes, reckoning on whether or not they area unit being employed in an exceedingly buzz saw, band saw or alternative sort of instrumentation.  


Another side of the blades that varies reckoning on what the blade is meant to chop through is that the bond. The bond relates to however arduous or soft the powder metal is that mixes with the crystals to make the cutting segments or teeth.   The bond is a very important side of a blade as a result of it controls however simply the segments alter throughout operation therefore newer segments become exposed, keeping the blade edge sharp.   


Most blades may be used either throughout wet or dry operation, however they work best with wet cutting. Wet cutting is best for variety of reasons. For one, the water prevents the blade from warming as a result of it cools the blade because it operates and extends the lifetime of the blade. Water additionally leads to less mud once cutting, which might be harmful if inhaled  and clog the saw throughout use. Finally, wet cutting removes the suspension throughout the cutting method. once dry cutting is that the solely choice, it's necessary to permit the blade to chill off therefore it does not overheat. this may be done by stopping sporadically between cuts or permitting the blade to spin freely once the cut (this provides a lot of air to chill off the blade), however the latter technique ought to be used rigorously since it may be dangerous. it's additionally necessary to avoid eupneic the mud created throughout the dry cutting method.  


These blades area unit utilized by contractors, route departments, hearth and police rescue squads, and in several alternative applications that need the required strength.



Home | About Us | Products | News | Equipment | Contact Us | Feedback | Mobile | XML

TEL: +86-511-86312330  E-mail: rita@yftools.com